KODAK DRYVIEW Laser Imaging Film 3.0
KODAK DRYVIEW Laser Imaging Film 3.0 is formulated specifically for KODAK DRYVIEW laser imagers and renders even higher quality images than current DRYVIEW laser imaging film. Producing superb images with lower noise, better density uniformity, and greater visibility of subtle detail to enhance your diagnostic confidence, DICOM compliant DRYVIEW Film can be used with all DRYVIEW Imagers, has a long shelf life, quick roomlight loading, and a large selection of film sizes.
Outstanding Diagnostic Image Quality
Sharp alphanumerics and continuous-tone images with exceptional spatial resolution, contrast, and grayscale levels; minimized noise and improved density uniformity in the emulsion
One Film Works with All DRYVIEW Imagers
Eliminate dual inventory management. No wet film processor required. Long shelf life streamlines inventory control and reduces purchasing frequency.
Save Time with Easy 10-Second Cartridge Loading
Daylight film cartridges load in under 10 seconds in full roomlight—no bag cutting or disposal. Cartridge recognition technology enables DRYVIEW Laser Imagers to recognize film type, size, and lot, as well as the number of sheets remaining.
Five Film Sizes for a Range of Imagers and Applications
Maximum film density
3.3 when used with DRYVIEW 8900*
*Higher maximum density with the optional digital mammography printing upgrade, for the DRYVIEW 8900 laser imager
System-Matched to Boost Productivity
System-matched with DRYVIEW Laser Imagers to enable Automatic Image Quality Control (AIQC)
AIQC calibrates DRYVIEW Systems to optimize quality - quality control is performed with no operator intervention, enhancing productivity
Storage and Handling of Film
KODAK DRYVIEW Film must be stored in a cool, dry place (41°F/5°C to 77°F/25°C) and protected from radiation and chemistry fumes.
• Tests under American National Standards Institute (ANSI) and ISO methods indicate DRYVIEW Film is archivable for 100+ years when stored at ANSI recommended temperatures (maximum 77°F/25°C)—far exceeding requirements for oncology and pediatric applications.
Choose from five sizes on 7-mil polyester base to suit your DRYVIEW Laser Imager and imaging application:
14 x 17-in. (35 x 43-cm),
14 x 14-in. (35 x 35-cm),
11 x 14-in. (28 x 35-cm),
10 x 12-in. (25 x 30-cm),
and 8 x 10-in. (20 x 25-cm) sizes.
All are available in clear and blue.
• For mammography applications, specialized KODAK DRYVIEW Mammography Laser Imaging Film has higher maximum density that provides a wider dynamic range with lifetime archivability.